Retail and Rental Suppliers

We have provided this section as a sales aid for our suppliers. Here you will find information on store displays, sales and rental tips.

Store Displays

Three Types of Displays:

A) Steel racking

B) Peg Board

C) Vignette

Tips On Selling

The Lightningbolt is targeted to "Do-It-Yourself" consumers who prefer a safer, more versatile, easier to use impact tool fo yardwork, landscaping and home improvement. Homeowners will find this an invaluable addition to their toolshed. With over 6 interchangeable tools heads the Lightningbolt can be used YEAR ROUND.

Main selling points:

• Many practical uses - indoor/outdoor/year round
• Easy to use and safer than many other tools
• Powerful and more efficient than many other tools
• Less strain on back and hands

This Tool is a great time saver. Why spend your valuable free time doing yard maintenance when you could be golfing or doing other pastimes you enjoy? If gardening is your pastime than this is going to be “Your New Favorite Tool.”

An Example: Many homeowners add considerable equity to their property by building brick patios, sidewalks, driveways. The Lightning Bolt with its 6x8 tamper attachment allows the Do It Yourself customer to prepare all ground for the proper installation of paving stone projects. Also, when building Piazza stone (cinder block) retaining walls or planter, it is necessary to build a strong foundation. These blocks are heavy and any ground movement will cause a fault line in the wall. The Lightning Bolt 6X8 tamper is the exact size for this task.

How to Use

1) Place the Lightningbolt in the exact position required. For example: When splitting wood, wood must be placed on a hard surface. Always place the wedge on the outer diameter of the wood.

2) With the Lightningbolt in a working position, remove locking pin.

3) Hold the outer power bar with both hands approximately 12" to 18" apart. It is important to find ones' own comfort zone for the exact working position on the power bar.

4) Using a long powerful stroke, slide the power bar up to your own lifting range, then bring the power bar down striking the tool head.

Please note: the longer the striking stroke combined with the speed over the mass results in greater compression against the tool head, maximizing the Lightningbolt's potential power. 

5) Once task is completed, replace locking pin.

Safety Tips

Always wear safety glasses, bystanders should also wear safety glasses.

Before using or transporting, insure power bar is in full contact with tool head and in locked position.

This tool should not be struck by or against an equally hard or harder object (such as a hammer, sledge or maul) or chipping may occur causing eye or bodily injury.

When using the Lightningbolt keep all hands and feet away from both the impact zone of the tool head and the area in which the power bar and the tool heads meet.

Handle with care and avoid dropping.